QUALITY
All of our sights are put through a 10-point inspection to ensure that you will get exactly what you want. These state of the art sights are not only cosmetically clean, they are mechanically sound. We want the best for our bows and the best is what we provide for our customer.

100% LIFETIME GUARANTEE
All pieces are milled out of 6061 aircraft aluminum. This means they are tough and have the precision accuracy that is dominating national competition. We stand behind our product, giving you the security of a 100% Lifetime Guarantee. Warranty protects against all manufacturers defects. (Fiber optics not included in warranty.) Essentially you are investing in the last sight you will ever need.

CENTERING - THE ADVANCED AIMING TECHNIQUE!
All Spot-Hogg sights come with round pin guards and white alignment rings. We have found that centering your pin guard in your peep is much more accurate and easier to duplicate than trying to center a single pin. When you center your pin guard, you are centering one circle inside of a slightly larger circle making it easier to tell when you are slightly off center.

Centering your guard will allow you to use a larger peep than you might normally use, which is an added benefit for hunters in those low light situations.
Scope shooters have been using this idea for years. After all, when have you ever seen a square scope? With our round pin guard, you can have freestyle accuracy with a pin sight

2ND AXIS LEVELING
The majority of the sights on the market right now have some type of level on them. Naturally, you would think that these levels are installed square to the sight and when you put it on your bow and hold it "level", it should be level as well. NOT TRUE! We have spent countless hours shimming sight mounts to get our sights truly square to the riser. This frustrating practice led us to take extra precautions when installing the levels here at Spot-Hogg.

All of our levels are precisely installed in the pin guards making sure that the levels are square to the vertical wire. As an added bonus our Hogg-It and Hunter sights have a second axis adjustment. Just mount the sight on your bow, hold the riser level, and adjust the sight to match. If you shoot with a cant, you are going to love this feature. This is the first sight you can accurately adjust your level to match your cant.

While not all of our sights have the 2nd axis adjustment, don't worry because of the precise installation and machining process mentioned before, if your riser is square, your second axis should be set as well.

3RD AXIS LEVELING
3rd axis leveling is the squaring of your level, so that the bow will be held in the same vertical plane for flat, uphill, or downhill shots. If your 3rd axis is not properly set, your level will lie to you, causing you to cant your bow when shooting up or downhill. Resulting in left and right arrows, no matter how good you executed your shot.

Leveling your 3rd axis must be done at FULL DRAW. Bow vises and bench jigs are not accurate because they don't take into account the torque in the bows riser when it is drawn. A sight that is squared at rest will not be square at full draw, when aimed up or downhill due to the torque in the riser. Both the Hogg-It and Hunter models have a 3rd axis adjustment that allow you to level up your sight without the bothersome task of trying to shim your bow mount.

SEE HOW TO SET YOUR 3rd AXIS PROPERLY
coming soon.